SparkFun Pro RF - LoRa, 915MHz (SAMD21)

SparkFun Pro RF - LoRa, 915MHz (SAMD21) Australia
SparkFun Pro RF - LoRa, 915MHz (SAMD21) Australia SparkFun Pro RF - LoRa, 915MHz (SAMD21) Australia SparkFun Pro RF - LoRa, 915MHz (SAMD21) Australia SparkFun Pro RF - LoRa, 915MHz (SAMD21) Australia
Product ID: SF-WRL-14916


We have 1 units of the SparkFun Pro RF - LoRa, 915MHz (SAMD21) in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Friday, Feb 22 to most parts of Australia.

We can get a further 96 units from Sparkfun Australia.
If you order today we can dispatch this stock between Thursday, Feb 21 and Tuesday, Feb 26 2019.

Updated 10 days ago
Data Sheets & Documents
Updated 4 months ago
Updated 10 days ago
Sparkfun's Description of the SparkFun Pro RF - LoRa, 915MHz (SAMD21)


The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for anyone interested or experienced in utilizing long range data communication.

Every pin on the SparkFun Pro RF is accompanied with a ground connection making the buttons and LEDs easy to connect. In case your building something to be embedded into clothing or other physically harsh environment the antenna includes a stress relief hole to make sure your wire antenna survives. A short (3 inch) wire antenna is sufficient for “short” distances (up to 1 mile line-of-sight), but we’ve also included a u.FL antennae connector for potentially longer distances.

The Pro RF also includes a power switch and 2-pin JST connector for powering from a lithium battery. With a Micro-B USB and the power switch in the off position, the Pro RF will charge the attached battery! The board programs over a reinforced Micro-B connector with a slim reset button that fits nicely on the side of the board. We’ve even added our popular Qwiic connector to the edge of the board making it incredibly easy to add sensors and actuators without the need for solder or a soldering iron!

Thanks to the Arduino LoRa library, the RFM95W radio is an easy to use packet radio. But it doesn’t stop there because closing a few jumpers on the underside of the SAMD21 Pro RF initiates LoRaWAN mode on the radio module making it a node in a distributed sensor network.

Get Started With The Sparkfun SAMD21 Pro RF Guide

SparkFun Pro RF - LoRa, 915MHz (SAMD21) is listed in: