Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25

Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Australia
Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Australia
Product ID: AF-2780

$1.10

We have 16 units of the Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Tuesday, Jan 22 to most parts of Australia.

We can get a further 100 units from Adafruit Australia.
If you order today we can dispatch this stock between Wednesday, Jan 23 and Monday, Jan 28 2019.

Description
Updated 10 days ago
Data Sheets & Documents
Updated 10 months ago
Collections
Updated 10 days ago
Adafruit's Description of the Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25

Description

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!

This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.

We have a slew of different resistor packs with different ohms of resistance; check them all out here!

Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 is listed in:
Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 Guides
Program an Uno with Raspberry Pi

The Raspberry Pi and Arduino are both popular boards, but each are better suited for different things. That said, why not combine the two?

In this guide, you will learn to connect an Arduino UNO to the Raspberry Pi and program it from an Arduino IDE within Raspbian. A Raspberry Pi 3 Model B+ is used here but the instructions are the same for any other board. We will build a circuit using a breadboard, and write a sketch on the Arduino IDE that will have LEDs lighting up.

Once you've mastered the basics, you are one step closer to working on more advanced projects that requires the use of both boards. These could include a smart home, or smart jukebox among many other projects.