Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25

Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Australia
Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Australia Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Australia
Product ID: AF-2784

$1.10

We have 12 units of the Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Thursday, Dec 20 to most parts of Australia.

Description
Updated 19 days ago
Data Sheets & Documents
Updated 8 months ago
Collections
Updated 19 days ago
Adafruit's Description of the Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25

Description

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!

This is a 25 Pack of 10K Ω Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.

We have a slew of different resistor packs with different ohms of resistance; check them all out here!

Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 is listed in:
Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Guides
Control a Servo with Arduino

Servos are a basic component in many Arduino projects.

In this guide, we will learn how to switch on a servo, make it press a button, and take a photo with the micro servo and a 100% Arduino compatible development board, the Little Bird Uno R3.

Learning to control a servo motor will enable you to create all sort of projects, from robotic arms to DIY catapults and cocktail machines.

Use Analogue Sensors with Raspberry Pi

While the Raspberry Pi can control digital inputs and outputs, what if you wanted to read analog signals? That's when analog to digital (ADC) converters come in the picture.

In this guide, we'll connect up an Analogue to Digital Converter (the MCP3008) to the Raspberry Pi, and then connect a light dependent resistor (LDR) or light sensor to it. We will then program it to read and output values from the LDR.

After completing this guide, feel free to connect other analogue sensors to your Raspberry Pi!