Seleae/ USBee / USB Blaster Combination: Mini Logic

via Itead
SKU IT-IM120911002

DISCONTINUED: This product has been discontinued, the page is available for reference and documentation.


Mini Logic is a multi-functional tool,it can be used as a logic analyzer, not just the Seleae but also the USBee AX!

It is not only a logic analyzer but also a USB Blaster , you can use it to program and debug your CPLD/FPGA/DSP project.

This logic analyzer comes with the case and the cables. If you want to change it to other mode(Default Seleae) like USBee , you need to open the case and modify the jumpers.It’s a nice tool for hobbyist who need to debug their project, expertly CPLD/FPGA/DSP project.

There are two jumpers for firmware selection, it means choose one of the three EPPROM for boot up.And choose the I/O selection, it’s the 10 pins of cables connection.

Note that modify the jumper when power off! Don’t make anything when the tool power on. When you use the Seleae or USBee mode, the hardware can be identified as a Seleae USB Logic by Seleae software or USBee AX by USBee software. Now you can spy it on the data bus that you want to analyze.

When the hardware is set to USB Blaster mode , it can work as a ALTERA USB Blaster (Clone). You can use it for many CPLD/FPGA programming and debugging.

Package List

  • Mini Logic*1
  • Cable with breadboard jumper interface *1
  • Cable with probes *1
  • 10 pins cable for USB Blaster *1
  • Type B USB cable *1