50k Ohm Logarithmic (A) Single Gang 24mm Potentiometer

via Jaycar

We can get 1747 units in Australia from Jaycar. If you order today, we can dispatch this stock between Mar 01, 2021 - Mar 06, 2021.

With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating is 0.5W max. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value50K

Potentiometer Diameter 24mm
Log or Linear? Logarithmic
Potentiometer Knob Type Imperial D
Potentiometer Terminal Type PCB mount
Potentiometer Shaft Length 38.5mm
potentiometer nut size 24mm(3/8inch 32THD)
Passive marking code Number code
Passive number of legs 3
Component package Metal can
Passive connector type Solder Legs
Passive mount type Panel,Through Hole
Pack Quantity 1pc
Resistance level 50kΩ
Continuous Power 0.25W
AC Voltage rating 150V