PrintrBot Metal PLUS 3D Printer - Black Assembled [Heated Bed - Model 1504]
Adafruit's Description of the PrintrBot Metal PLUS 3D Printer - Black Assembled [Heated Bed - Model 1504]
New from Printrbot, the Metal Plus is a rock solid, all metal, fully-assembled beast of a printer!
The new Printrbot Metal Plus w/ Heated Bed is constructed of powder coated metal and machined aluminum with open platform for fabricating parts up to 10 x 10 x 10 inches using 1.75mm PLA filament (As opposed to the 6 x 6 x 6 inch build volume of the cheaper Printrbot Simple Metal).
As of May 19th, 2015, we are selling the updated 1504 model with a heated bed.
Model 1504 has updated metal parts including, but not limited to: increased support for the extruder motor wiring, access to the Printrboard reset button, and a sweet "PB" logo on the back of the print bed as shown in the photos above.
The printer head moves on the X (left to right) and Z (up and down) axes, while the print bed moves on the Y (backward and forward) axis. The Mic 6 aluminum bed is extremely flat and works with an Auto-Leveling Probe with the user-chosen software to calibrate the height of the print head. The Plus comes with a 1.75mm ceramic Ubis Hot End.
The printer uses open source software and connects to the computer using the included mini-USB cable. Using a micro-SD card (not included), the printer can be disconnected from the computer for untethered printing during long print jobs.
Linear rails and carts for stability and smooth movement of the print head and bed. The GT2 belt and aluminum pulley system facilitates precise movement of the print head and bed. The NEMA 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001.
In the box:
- Printrbot Plus
- Roll of sample filament
- USB cable
- Power Supply
- Printed Test Cube
Note: Shipping weight reflects UPS' new dimensional weight regulations.