Premium Male/Male Jumper Wires - 40 x 6 (150mm)

Name: Premium Male/Male Jumper Wires - 40 x 6 (150mm)
Brand: Adafruit
SKU: AF-758
Price: 6.32 AUD
Availability: InStock

Premium Male/Male Jumper Wires - 40 x 6 (150mm) Australia

Product ID: AF-758

$6.32

We have 57 units of the Premium Male/Male Jumper Wires - 40 x 6 (150mm) in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Wednesday, Dec 19 to most parts of Australia.

We can get a further 100 units from Adafruit Australia.
If you order today we can dispatch this stock between Thursday, Dec 20 and Tuesday, Dec 25 2018.

Updated 15 days ago

Updated 8 months ago

Updated 15 days ago

Wishlist

3 Guides

Description

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

We have these in three handy lengths: 3"/75mm, 6"/160mm and 12"/300mm. If you want the female/female type, we have those too!

Note: The length of the jumper wires is sometimes a bit longer than what is listed.

For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"

Premium Male/Male Jumper Wires - 40 x 6 (150mm) is listed in:

One of the simplest ways to get started with physical computing is to get an LED to turn on and off.

In this guide, we will get an LED to blink by connecting it to a Raspberry Pi 3 Model B. We will then program it using the GPIO Zero Python library.

On completion of this guide, you will have gained a better understanding of how to utilise LEDs as well as on programming your Raspberry Pi.

Push buttons are an essential component in many Raspberry Pi projects and have many uses.

In this guide, we will connect a momentary push button to a Raspberry Pi and program it using the GPIO Zero library. Upon button press, it will print out the words, "Button has been pressed!"

After completing this guide, you will have gained a basic understanding of how to wire up and program push buttons with the Raspberry Pi.

Get acquainted with the Raspberry Pi and MaKey MaKey board by starting with a simple project.

In this guide, we will be recreating the Operation Game with a Raspberry Pi and MaKey MaKey board.

Quick Links

Premium Male/Male Jumper Wires - 40 x 6 (150mm)

$6.32

Adafruit's Description of the Premium Male/Male Jumper Wires - 40 x 6 (150mm)

Description

Premium Male/Male Jumper Wires - 40 x 6 (150mm) is listed in:

Premium Male/Male Jumper Wires - 40 x 6 (150mm) Guides