PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC

PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Australia
PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Australia PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Australia PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Australia PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Australia PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Australia
Product ID: AF-3085

$45.00

We have 70 units of the PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Monday, Jan 28 to most parts of Australia.

We can get a further 28 units from Adafruit Australia.
If you order today we can dispatch this stock between Monday, Jan 28 and Thursday, Jan 31 2019.

Description
Updated about 2 months ago
Data Sheets & Documents
Updated 10 months ago
Collections
Updated about 2 months ago
Adafruit's Description of the PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC

Description

The Prop Shield with Motion Sensors for Teensy 3.2 and Teensy-LC is meant for making interactive light and sound effects on small handheld props and wearable costumes! Good for all sorts of projects, and designed by the creator of the Teensy so you know it's gonna be well supported

  • Motion Sensors - Allows motion interactive light & sound.
  • Audio Amplifier - Clear quality audio output to a small speaker.
  • Fast LED Driver - Drive APA102 / Dotstar LEDs for colorful lighting with rapid response.
  • Flash Memory - 8 Mbyte storage for images, sound clips, and data logging.

This shield features a 10 degree-of-freedom motion sensor with triple-axis accelerometer/magnetometer/gyro and temperature + barometric pressure/altitude sensing, 2 Watt audio amp, two high speed 5V buffers for driving DotStar LEDs, and an 8 MegaByte flash memory for images, sound clips, or data logging. It's approximately the size of a Teensy, just slightly longer to allow space for mounting holes and connections for power, speaker, and LEDs.

We also carry the low cost Prop Shield which is identical to this standard Prop Shield, except the motion sensors are removed.

Much more information is available on the PJRC site!


PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC is listed in: