Micro servo

Micro servo Australia
Micro servo Australia Micro servo Australia Micro servo Australia Micro servo Australia
Product ID: AF-169

$10.03

We have 16 units of the Micro servo in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Friday, Mar 22 to most parts of Australia.

We can get a further 100 units from Adafruit Australia.
If you order today we can dispatch this stock between Monday, Mar 25 and Thursday, Mar 28 2019.

Description
Updated about 2 hours ago
Data Sheets & Documents
Updated 12 months ago
Collections
Updated about 2 hours ago
Adafruit's Description of the Micro servo

Description

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware.

To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.

Note that the default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go too far you could break your servo!