Lithium Ion Polymer Battery - 3.7v 600mAh

Lithium Ion Polymer Battery - 3.7v 600mAh Australia
Lithium Ion Polymer Battery - 3.7v 600mAh Australia Lithium Ion Polymer Battery - 3.7v 600mAh Australia
Product ID: LB-00237

$12.00

We have 113 units of the Lithium Ion Polymer Battery - 3.7v 600mAh in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Friday, Dec 21 to most parts of Australia.

We can get a further 1000 units.
If you order today we can dispatch this stock between Tuesday, Jan 01 and Friday, Jan 04 2019.

Description
Updated 8 days ago
Data Sheets & Documents
Updated 9 months ago
Collections
Updated 8 days ago
Little Bird's Description of the Lithium Ion Polymer Battery - 3.7v 600mAh

Description

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 600mAh for a total of about 1.9 Wh.

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 150mA or less. Adafruit suggest Adafruit's Micro Lipo charger, which has a 100mA default rate. You can also set the Micro Lipo to 500mA rate for a faster charge.
Like most lipos, the batteries they sell do not have thermistors built in. This is why they suggest charging at 1 C or even less - 100 to 500mA is a good rate, and available from any USB port if using a USB-powered charger

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.

 

Technical Details

Details:

  • Weight: 10.5g
  • Size: 29mm x 36mm x 5.5mm
  • Power Lead Length: 80mm
  • Output: 600mAh at 3.7V nominal
 

 

Lithium Ion Polymer Battery - 3.7v 600mAh is listed in: