Wearables Batteries/Battery Holders

LB-LR0295

These are a simple 9v battery holder with DC connector.

LB-LR0309-16

Flat 4xAA battery holder with a barrel jack.

AF-1871

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or sim...

AF-653

This battery holder is by far the easiest way to add a battery to a small wearable project. By coincidence, there are two small 1mm diameter holes in the metal connection tabs, just large enough for a #5 or smaller needle to pass through. One tab connects to common ground (neg...

LB-LR0309-20

Single Slots 1x 9V Battery Holder Case with wire leads for soldering / connecting.

LB-LR0294

 

AF-783

This tiny coin cell battery holder is ideal for small portable or wearable projects.

LB-LR0309-18

This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for.

TB-PH9209

The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.- All have connection wires 150mm long- We can supply OEM quantities of holders with special configurations.

TB-PH9200

The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.

TB-PH9202

The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.- All have connection wires 150mm long- We can supply OEM quantities of holders with special configurations.

TB-PH9206

The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.- All have connection wires 150mm long- We can supply OEM quantities of holders with special configurations.

TB-PH9210

* 150mm long tinned leads

TB-PH9235

- Plastic holder for 9V 216 batteries

TB-PH9203

The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.- All have connection wires 150mm long- We can supply OEM quantities of holders with special configurations.

IT-IM120720003

Overview

IT-IM120720004

Overview

IT-IM120720005

Overview

SS-320180008

Please read through the guide in Shenzhen 2 U before making any purchase in this catalogue.

IT-IM120803022

Overview

IT-IM120803023

Overview

IT-IM120803024

Overview

IT-IM120803025

This battery holder is suitable for 18650 lithium cell. It can hold two batteries. It puts a nice finishing touch on your battery powered project. The leads are about 150mm, and the last 5mm of them are tinned. It is series connection.

PL-1142

Discontinuation Notice: We are no longer carrying this battery holder. Please consider the 2-AAA Battery Holder as an alternative.

PL-1148

This battery holder features two 6", 24-gauge leads that have 5 mm of insulation stripped off of the ends.

PL-1149

This battery holder features two 6", 24-gauge leads that have 5 mm of insulation stripped off of the ends.

TB-PH9260

Holds 1 x AAA battery

TB-PH9222

The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.- All have connection wires 150mm long- We can supply OEM quantities of holders with special configurations.

TB-PH9237

SPECIFICATIONS

TB-PH9281

Simply add your own AA batteries and you have a 6V power source to power your gadgets when mains power is not available. It is water and dustproof, so it can be used outdoors, which could include powering outdoor weather sensors, tank level meters, door entry buzzers, decretiv...