Tools

SF-TOL-14190

The Chapman Pocket Screwdriver Set is a unique addition to the screwdriver family, as it utilizes a ¼" ratchet, similar to one found on a socket wrench, as well as four custom-built drive bits. This pocket screwdriver is aptly named for its size — not only fitting in your pock...

SF-TOL-14233

Do you need to remove the oxidation and surface contamination from your soldering iron tip? The Solder Tip Polishing Bar allows you to do just that! This bar provides a great way to bring your older or neglected soldering tips back from the dead. Just make sure the tip is cold...

SF-TOL-10326

The SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. It’s great for heat-shrink, melting things, and even very basic low temp rework. The size is great for a lot of different applications and it heats up pretty quickly.

SF-DD-14759

The solder vacuums are a great (and sometimes under appreciated) little tool for solder rework.

AF-308

If you're looking for one of the best multimeters, we're proud to now offer our personal favorite! The Extech EX330 "12 Function Mini MultiMeter + Non-Contact Voltage Detector. Autoranging DMM with NCV detector and Temperature function". This product is the winner of EEVBlog M...

PL-1086

These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm × 12 mm × 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S), such as our micro metal gearmotors. We offer these brackets in black plastic and white ...

SF-TOL-14872

Let’s face it, wire strippers can be problematic to use if you aren’t sure what your doing and it could result in you accidentally wasting material. Lucky for you, there is this Self-Adjusting Wire Stripper that can take any almost any wire, place it in the head of the tool, c...

AF-152

These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.

AF-3658

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs to construct your maker projects for days on end! M2.5 screws fit nearly all of the Adafruit breakout/development ...

$204.82
SF-TOL-13843

The Mooshimeter is a multi-channel circuit testing multimeter that uses your smartphone or tablet, through Bluetooth 4.0, as a wireless, high-resolution graphical display. Each Mooshimeter is able to safely measure 600V at 10A with 24bit resolution from up to 150 feet away. If...

$4.32
SF-TOL-08964

This is a brass sponge that will help clean your soldering iron tip. Use it to remove residue from your iron tip before soldering. It cleans better than conventional sponges and will not damage your iron tip. Made of low abrasive brass shavings and requires no water. Works wel...

AF-2668

Removing SMD parts more complex than a resistor or SOT-23 can be a real bear. You want to get the part off without damaging traces, and if possible, without damaging the part either. You could haul out your hot air tool or you could go in surgically with this handy SMD Removal...

SF-TOL-13151

The Hakko FX-901 is a cordless soldering iron that is both portable and practical and provides you with a means to easily solder on the go. Powered by four AA sized batteries, this soldering iron is capable of 60-120mins of use (depending on battery type) before replacing its ...

SF-TOL-13193

These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. We really like the quality and sturdiness of these crimp pliers. These pliers are capable of crimping very small 0.25 - 1.5mm crimp pins and 28-20 AWG wires together. ...

PL-1929

Note: This crimping tool is 3 mm narrower than our more versatile 0.1-1.0 mm² capacity crimper, and it does not crimp the full extent of the wire barrel on the JR, Futaba J, and 0.1" housing crimp pins (see the picture at the bottom of this page). It still makes a sufficient ...

PL-2266

This lightweight (about 15 g) but strong bracket is made from 3mm-thick black anodized aluminum and is specifically designed to work with the typical faceplate mounting holes of NEMA 17 stepper motors. The slots through which the motor mounts to the bracket allow for 2 mm of ...

AF-3806

Heard about locksport and want to try it for yourself? It's a fun hobby you can pick up easily (ha!).

PL-989

These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm × 12 mm × 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S), such as our micro metal gearmotors. We offer these brackets in black plastic and white ...

PL-2794

Overview