Solar Power

SF-PRT-09541

The BPW34 is a tiny, general purpose PiN photodiode. This photodiode has a ton of uses, one of which is to use it is a mini solar cell to power your project. The cell is sensitive to a wide range of light wavelengths (430-1100nm), so it should produce power in a number of diff...

LB-LS0040

Power your next project using the Australian Sun with this solar panel. The panel is capable of 3.5 watts in the open sun with a peak power output around 6V at 580-600mA.

AF-1328

Turn a wall adapter into a mini power supply with this incredibly useful adapter.

DF-FIT0333

Light, thin and versatile solar panel at 1.5V/250MA. Unlike regular solar panels, it is truly flexible to be bent, sewed or treated in the clothing to match any kind of surface line. A good choice for DIY enthusiasts in selecting an alternative power source. Clean energy, in a...

AF-2788

This convenient 3.8mm/1.3mm or 3.5mm/1.1mm or 1.3mm DC to 2.1mm DC adapter cable lets you plug one of our solar panels into our optimized Solar Lithium Ion/Polymer charger!

AF-2747

These 6 Volt, 9 Watt panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs. They are waterproof, scratch resistant, and UV resistant.

AF-1527

Never go looking for some AAA's again, this solar racer car requires no batteries! The Volta Racer Solar Motorcar Kit contains all of the necessary parts required to successfully assemble your car - including the worlds first flexible polycrystalline silicon solar cell used fo...

AF-1525

These panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs.

DF-FIT0573

This powerful monocrystalline solar panel features an A-class monocrystalline silicon panel imported from the United States, a conversion efficiency of up to 21% and a waterproof design, so you don't have to worry about rain water.

AF-200

These panels come to us from Voltaic Systems, makers of fine solar-powered bags and packs. These are waterproof, scratch resistant, and UV resistant. They use a high efficiency monocrystalline cell. They output 6V at 330 mA via 3.5mm x 1.1mm DC jack connector. The substrate is...

DF-FIT0600

This powerful monocrystalline solar panel features an A-class monocrystalline silicon panel.

DF-FIT0601

This is a high-performance, lightweight, portable monocrystalline silicon solar panel in a PET package, with an integrated voltage regulator output of 5V, with working indicators, USB type-A mother-port output, plug-and-play.

SF-PRT-14795

Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This PowerFilm Solar Panel is a lightweight, paper thin, and flexible power solution that can be easily integrated with your electronics to provide you with solar...

SF-PRT-14796

Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This 10 pack of PowerFilm Solar Panels are lightweight, paper thin, and flexible power solutions that can be easily integrated with your electronics to provide yo...

SF-PRT-14798

Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This five pack of PowerFilm Solar Panels are large, paper thin, and flexible power solutions that can be easily integrated with your electronics to provide you wi...

SF-PRT-14799

Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This PowerFilm Solar Panel is a lightweight and paper thin power solution protected by being sandwiched in between PSA and Kynar polymers that can be easily integ...

SF-PRT-14800

Did you know you have a practically unlimited source of energy, half a day, fully available to power your project? This five pack of PowerFilm Solar Panels are lightweight, paper thin, power solutions protected by being sandwiched in between PSA and Kynar polymers that can be ...

SF-PRT-12885

This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo bat...

AF-2352

Hoot! Hoot! "The owls are not what they seem."

AF-390

NOTE: This product is only designed for use with solar panels sold at the Adafruit store.

SF-PRT-13781

Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high quality, high output, fully enclosed solar panel with a nice solid aluminum/plastic frame. The panel is capable of 2 watts in the open sun with a peak power o...

SF-PRT-13783

Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high quality, high output, fully enclosed solar panel with a nice solid aluminum/plastic frame. The panel is capable of 6 watts in the open sun with a peak power o...

SF-PRT-13784

Have a project that needs some good power? Do you like free power provided by our friend, Mr. Sun? Check out this high quality, high output, fully enclosed solar panel with a nice solid aluminum/plastic frame. The panel is capable of 9 watts in the open sun with a peak power o...

AF-2306

Scary. Solar. Skull-y. The Solar Powered SKULL Blinky LED Pendant by Lumen Electronic Jewelry is an awesome new kit where, with a little soldering, you can make a battery-less blinking skull. That's right, there's no coin battery! Instead, a 1 Farad super capacitor is used to ...

AF-3809

These panels come to us from Voltaic Systems, makers of excellent solar-powered bags and packs.

DF-DFR0264

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the connection is simple and convenient. Used with the solar battery and lithium battery...

AF-743

Outdoor enthusiasts rejoice! We now have standard 5.5/2.1mm DC power cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!). They are a little bulkier than normal DC jacks...

AF-417

Harness even more power from the sun with this nice big solar panel. We had these custom made for us when customers let us know they needed more than what our 2W panel could provide. This panel is a 12-cell (6V) assembly mounted onto a fiberglass PCB and covered with PET plast...

AF-327

This product is a 3-in-1 cable. By itself, it can act as an extension cord for any 5.5/2.1mm DC power cable. The heavy 24 AWG wires can handle up to 5A.

AF-700

This skill badge is self-fulfilling! Normally you would get the badge after the project is done, but in this case, the badge can be part of the project! The solar panel is epoxied into a round disc 55mm diameter (about 2.2 inches), its rugged and looks cool besides. We include...