Robotics & CNC

DF-FIT0094

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended...

PL-3257

Overview

SF-ROB-12131

These 2" long stainless steel shafts have a diameter of 3/8". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.

SF-ROB-12144

These standard gearmotors are incredibly tough and feature full metal gears to help you drive wheels, gears, or almost anything else that needs to turn. They have a gear ratio of 18:1 and operate up to 12 volts and deliver a stall torque of 27.3 oz-in. and a max speed of 168 R...

SF-ROB-12151

These clear pink precision disk wheels have an outer diameter of 3”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

SF-ROB-12433

These quad hub mounts can attach to the end or the middle of Actobotics channels to provide you a 90 degree angle with additional attachment points for electromechanical projects. Additionally these hub mounts are equipped with a beveled spot fo a ¼-20 hex nut, making this hub...

SF-ROB-12436

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 3/16” to 3/16" sha...

PL-392

Note: We have released a second-generation version of this product, the Jrk 21v3 USB Motor Controller with Feedback, which has many substantial improvements over this product.

SS-105020010

The Grove – Mini I2C motor driver is a very tiny motor driver with I2C interface, and it includes two motor driver chips - DRV8830, which helps you control two DC motors or winding of stepper motors on a small board simultaneously. 

SF-ROB-09664

The Micro Maestro is the first of Pololu’s second-generation USB servo controllers. The board supports three control methods — USB for direct connection to a PC, TTL serial for use with embedded systems, and internal scripting for self-contained, host controller-free applicati...

SF-ROB-12476

These pinion gears attach to a ¼” D-shaft or gear motor using a setscrew. They have 32 teeth with a gear pitch of 32P, an outer diameter of 1.063”, and a bore of 0.25”.

SF-ROB-12211

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75”, a outer diameter of 0.42”, and couple 1/4” to 6mm shafts.

DF-FIT0489-B

INTRODUCTION

SF-ROB-12504

These dual channel 45 degree angle brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share the same 0.5" center hole and 0.77" and 1.5" mounting patterns as the channel.

MB-61810

CNC Motor Bracket is specially designed for fixing 555 High-speed CNC Motor on your projects. With the 4mm through holes on this bracket, you are able to connect it to other Makeblock parts to create projects.

SF-ROB-12245

These ball bearing hubs from Actobotics are great when you need to securely fasten a free-spinning shaft to a stationary channel to drive a pulley, wheel, or other rotating device. Each ball bearing hub has an outer diameter of 1", a bearing bore of 0.25", a thickness of 0.5",...

SF-ROB-12537

These black precision disk wheels have an outer diameter of 2”, a width of 0.23”, and utilize the 0.77” hub pattern. These simple wheels are ideal for any light robot that needs a basic disc for simple movement, and use a removable rubber ring for traction.

PL-3060

Overview

SF-TOL-14908

If you need more ways to hold material in your Shapeoko, this Threaded Table provides you with plenty of connection points.

SF-ROB-12281

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 210:1 and operate up to 12 volts and have a stall torque of 50 oz-in. and a max speed of 130 RPM. Each micro gearmotor sports a 3mm D-shaft.

SF-ROB-12293

These 4" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8

PL-3701

SF-ROB-13137

These threaded aluminum standoffs are 3/4” long and have a thread pitch of 6-32, and an outer diameter of 0.25”.

SF-ROB-12593

These angle brackets are perfect for attaching two Actobotics aluminum channels together at a 90° angle. Each side of these brackets offer two 6-32 tapped mounting holes spaced 1.061" apart with the long side also offering an addition 6-32 through-hole. These brackets have a b...

IB-o4v4

The vibration motor module is similar to vibrators in cell phones.

SF-ROB-12353

These quad hub mounts can attach to brackets, ServoBlocks, or anything that needs a 90 degree angle with additional attachment points for Actobotics project. These hub mounts have a width of 1”, a thickness of 0.25”, a 0.50” bore, and utilize the 0.77” hub pattern.

SF-ROB-12354

These 8" long stainless steel shafts have a diameter of 3/16". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 83B.