Robotic Hardware

$143.95
MB-P1030024

What is codey rocky? Codey Rocky is a coding robot for STEAM education.

WW-SKETCH

Sketch Kit is the latest accessory for Dash & Cue robots that enables kids to visualize the results from their code on a large canvas. Sketch Kit helps kids express their creativity and exercise their critical thinking and spatial reasoning skills as they draw geometric shapes...

LB-BK-LR0259-10

An affordable bulk pack of 9 gram micro servos for you to throw at that next mechatronics project. Each pack includes 10 9 gram servos with accessories including single arm horns, double arm horns, four point horns, phillips mounting screws and horn phillips screws. Each serv...

MB-P1030052

Codey Rocky & Neuron Education Kit is a package designed for programming and maker education. In addition to over 10 electronic modules that come with Codey Rocky, six Neuron blocks are included in the kit, which allow students to gain a more intuitive understanding of how se...

SF-ROB-12607

These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mec...

SF-PRT-10927

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look.

SF-ROB-12598

These standard rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mecha...

SF-ROB-12122

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These channels can serve as connection points for servos, motors, and shafts while still providing an easy to assemble structure. Each alumin...

SF-ROB-12203

ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and case. The extreme versatility of ServoBlocks allow users to create complex, extremely rigid, structures with ease using standard Hitec servos. Using a clam...

SF-ROB-12222

These quad hub mounts can attach to the end or the middle of Actobotics channels to provide you a 90 degree angle with additional attachment points for Actobotics project. Additionally these hub mounts can be coupled with precision gearmotors for additional mounting possibilit...

SF-ROB-12270

These channel tube clamps are great for exactly what they are named as: securing a 1" diameter shaft or tube to an Actobotics channel or other mountable surface. These tube clamps have a 1" bore, a 1.3" long base, a height of 1.4", a thickness of 0.3", and two 6-32 tapped scre...

SF-ROB-12350

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SF-PRT-10739

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below.

SF-ROB-12605

These continuous rotation 3:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mec...

SF-ROB-12609

These long alloy steel 7/64" hex keys. The ball end style on each hex key allows a machine screw to be tightened at an angle. These hex keys are perfect for the 6-32 screws used by most Actobotics products.

SF-ROB-12383

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These channels can serve as connection points for servos, motors, and shafts while still providing an easy to assemble structure. Each alumin...

SF-ROB-12405

These wheel adaptors allow you to adapt 12mm hex drive wheels to our .770” hub pattern. The recessed .770” pattern allows you to run 6-32 socket head screws into any .770” hub or component that utilizes the .770” hub pattern. Each kit consists of two 2 aluminum mounts and 2 8-...

SF-ROB-12159

These ½" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hubs utilize the 0.77" hole pattern common throughout Actobotics. This spacer is ¼" thick.

SF-ROB-12174

This tube clamp allows you to secure two 1" bore tubes at 90 degrees. The tubes are held securely in place by set screws. Precision machined from 6061-T6 aluminum. these clamping hubs offer several advantages over set screw hubs. First, they do not damage the shaft which they ...

SF-ROB-12455

These clamping hubs are a great and cost-effective choice when attaching hub mount gears or wheels to shafts or tubes and can be a better option than set screw hubs if you don’t want to risk damaging whatever you need clamped. These clamping hubs have a 4mm bore, four 6-32 tap...

SF-ROB-13012

These flanged ball bearings fit nicely into a ½" diameter hole and has a ¼" bore. This makes it perfect for all Actobotics channels, hub mounts, or any ½" hole where you need to run a ¼" shaft. Each order is sold in packs of two.

SF-ROB-12591

This PVC clamp mount has a 1.315" bore, providing an easy way to incorporate standard 1" PVC pipe into your next project. A set screw secures the pipe while 2 6-32 tapped holes provide attachment points to additional parts.

SF-ROB-12600

These 360° rotation 3:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanica...

SF-ROB-12602

These 360° rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanica...

SF-ROB-12608

These continuous rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mec...

SF-PRT-10463

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length.

SF-ROB-12345

This spacer allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. Unlike the other hub spacers, this one does not have a ½" bore. The center hole is designed for use with 6-32" screws. These hubs utilize the 0.77" hole pattern common throughou...