Robotics Accessories

DF-SER0039

INTRODUCTION

MG-ATC001CAR

Kick fun into high-gear with a custom Turbo Cover for Sphero. While protecting against scratches and scuffs, Turbo Covers give you the traction and control to speed past your competition. With three performance-inspired colours to choose from, Turbo Covers haul serious bot. 

AF-1201

*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them.

SF-PRT-10228

These are very handy. They are simple angle brackets with one threaded and unthreaded hole. Use them for connecting PCBs at 90 degree angles, mounting accelerometers, gryros, etc. They can also be used on the universal plate set for mounting all sorts of sensors and such.

DF-SER0037

This small form factor micro servo with 360 degree continuous rotation is compatible with servo shields for Arduino. It's a very versatile small servo motor for micro robots or other applications where you don't have much space and the need of a full rotational motor with the ...

DF-FIT0503

INTRODUCTION

DF-SER0011

This is a metal gear servo(2.5kg) from Goteck.It's very small, lightweight, and powerful! Metal gear for longer wear life and extra strength in demanding applications. Perfect for use in medium-sized electric airplanes,helicopters or mini Robots.

SF-PRT-10450

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SF-ROB-12607

These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mec...

DF-DFR0430

INTRODUCTION

DF-FIT0486

INTRODUCTION

DF-FIT0225

This mounting kit provides you different types of standoffs with screws and nuts which are most commonly used in our projects here at DFRobot. We use them to mount circuit boards and help build robots.

SF-PRT-10927

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look.

SF-ROB-12598

These standard rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mecha...

SF-ROB-12122

These aluminum channels are the building blocks to the Actobotics line and function as the back bone to your electromechanical project. These channels can serve as connection points for servos, motors, and shafts while still providing an easy to assemble structure. Each alumin...

SF-PRT-10451

Standard Philips-head 4-40 screws. They are ¾" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SF-ROB-12270

These channel tube clamps are great for exactly what they are named as: securing a 1" diameter shaft or tube to an Actobotics channel or other mountable surface. These tube clamps have a 1" bore, a 1.3" long base, a height of 1.4", a thickness of 0.3", and two 6-32 tapped scre...

DF-FIT0483

A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*100 pulses per revolution. The motor has a long (0.354"/9.0 mm) D profile metal outpu...

SF-ROB-12350

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SF-PRT-10452

Standard Philips-head 4-40 screws. They are ½" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SF-PRT-10454

We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And how every nut passes a rigoro...

DF-FIT0185

This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-83R. It is a powerful 12V motor with a 131:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 2096 counts per revolution of...

SF-PRT-10738

Metal long standoffs: 1" long x ¼" OD. Used to get your proto board up off the table. #4-40 thread. Fits most development boards with available holes. Don’t forget the screws, found below.

SF-PRT-10739

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below.

DF-FIT0491

INTRODUCTION

SF-ROB-12605

These continuous rotation 3:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mec...

SF-ROB-12609

These long alloy steel 7/64" hex keys. The ball end style on each hex key allows a machine screw to be tightened at an angle. These hex keys are perfect for the 6-32 screws used by most Actobotics products.

DF-DFR0251

A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It is actually "automatic switch", using a small electric current t...

SF-ROB-13012

These flanged ball bearings fit nicely into a ½" diameter hole and has a ¼" bore. This makes it perfect for all Actobotics channels, hub mounts, or any ½" hole where you need to run a ¼" shaft. Each order is sold in packs of two.

SF-ROB-12602

These 360° rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanica...