Raspberry Pi Hats

AF-2738

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘Astro Pi’. The Sense HAT has several integrated circuit based sen...

FT-PISC

Easily connect the 128x128 Pixel OLED Module to your Raspberry Pi using this handy expansion board.

AF-2340

This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like...

DF-DFR0357

The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+, Raspberry Pi 2 Model B and newest Raaspberry Pi 3 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hu...

AF-2714

Stack and connect multiple plates and breakout PCB's onto your Raspberry Pi with this custom-made, 2x20 extra tall SMT female header. 

DF-DFR0450

INTRODUCTION

FT-PIBP

Need to attach some electronic components or sensors to your Raspberry Pi? PiBreak Plus is a prototyping board for the Raspberry Pi. It provides labelled breakout pins for all GPIOs, a large prototyping area with solder pads, and power rails for easy power connection.

AF-2314

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit with EEPROM

AF-3402

Pimoroni has taken all the great features of the Picade PCB and crammed them onto this super Picade HAT. It's the best, easiest way to make a super-sweet arcade system using any Raspberry Pi.

DF-DFR0358

This Raspberry Pi is Discontinued Now, We recommend other raspberry pi shields as a suitable replacement.

AF-3473

What if Scroll pHAT had twice times as many pixels and individual pixel brightness control? Scroll pHAT HD, that's what!!

AF-2327

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this hand...

AF-2324

It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this ...

SF-DEV-14328

The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection. Thanks to its I2C capabilities, this HAT saves the Raspberry Pi’s GPIO, allowing you to use them for other purposes. Additio...

AF-2310

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit.

SF-WRL-14552

Helium adapters make it simple to physically connect the Atom Prototyping Module to popular embedded devices. The Helium Atom to Raspberry Pi Adapter is an easy-to-use HAT-like board equipped with a NRF24LO1 port, Atom socket and RGB-status LED.

SU-RaspberryPiSenseHAT

Description

AF-3224

Add precise capacitive touch, distance sensing and high quality audio to your Raspberry Pi A+, B+, Zero and later (any Raspberry Pi with a 40 pin GPIO connector) with the Pi Cap from Bare Conductive! Connect Electric Paint or anything conductive to one of the 12 electrodes to ...

AF-3283

So you've got your Pi 3 with its built-in wireless LAN and Bluetooth, but what about your Pi Zero? Say hello to the IoT pHAT from Red Bear! This Zero-size board provides WiFi (802.11bgn / 2.4GHz) and Bluetooth (v4.1 / BTLE) connectivity direct from the GPIO header. You don’t n...

SU-UPSHAT

Introduction

DF-DFR0428

This is a portable 3.5" resistance touchscreen hat with 480 x 320 resolution designed for Raspberry Pi b+, Raspberry Pi 2 and Raspberry Pi 3. The DFRobot Gravity connector makes it easier to connect sensors and modules or even to debug Raspberry Pi via serial port. All the Ra...

AF-3474

Our pirate friends at Pimoroni have taken the I2S mono DAC and amplifier that they used on Speaker pHAT and Picade HAT and added a second one for stereo goodness. pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two rows o...

AF-2901

The HiFiBerry DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi 2 Model B and the A+ / B+ Models.  This product also works with the Pi 3!

DF-DFR0449

INTRODUCTION

AF-2336

"These go to eleven."  11 millimeters that is!

AF-2325

Control your Raspberry Pi 3, 2, A+, B+, or Zero with a flick of the wrist! The Pimoroni Skywriter HAT senses the position of your fingers in the air above.

AF-3475

AHOY, wanna spell out some LOVE with this COOL Raspberry Pi FOUR letter PHAT? Pimoroni's Four Letter pHAT has four 14-segment displays that you can use to display text, numbers, and a host of other characters. The LEDs are a beautiful retro green, just like your old digital al...

AF-2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header

AF-2288

Snap the Pimoroni Unicorn Hat on top of a Raspberry Pi model A+ or a model B+ for a fun 8x8 RGB LED matrix powered directly from the Pi.

AF-2187

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's harder to use than the Thru-Hole type headers, but for the slickest, slimmest fit, this header is recommended!