ITead Australia

Overview The DHT-22 is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't requir...

IT-IM120712007

OverviewThis module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and indep...

IT-IM120606013

The 315MHz RF link kit is consisted of transmitter and receiver, popularly used for remote control. Features Frequency: 315Mhz Modulation: ASK Rece...

IT-IM120628013

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V ...

IT-IM120606012

This is a 5V 2-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.2...

IT-IM120525001

Overview Colorduino is an RGB LED dot-matrix driver compatible with Arduino . Colorduino pairs the M54564 with a single DM163 constant current dri...

IT-IM140806001

Yes! We can build electronics projects just as easy as piling bricks. Arduino and community have made the programming much easier than ever before....

IT-IM120710006

Overview This is a Waterproof DS18B20 Temperature Sensor/Thermometer. The probe uses original DS18B20 temperature sensor chip. It is waterproof, mo...

IT-IM130327002

Overview This is a pack which includes 5pcs of 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing bet...

IT-IM120531001

This is a upgraded pack including 75pcs dual-male jumpers. It includes 4 different length: 250mm 5pcs 200mm 5pcs 150mm 10pcs 100mm 55pcs They are p...

IT-IM120530005

This is a 5V 4-Channels Relay module, It can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and MSP430.4...

IT-IM120525002

Overview Iteadmaple is a microcontroller board based on Leaf Maple. The Iteadmaple can achieve the maximum 72 MHz, it has 39 digital input/output p...

IT-IM120411012

OverviewIteaduino ADK Main Board is based on Android Open Accessory Development Kit(ADK). Using this ADK Main Board you can build your own mobile a...

IT-IM120411005

Overview What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in an...

IT-IM120710021

Overview This is a kit pack that gives you all of the basic thru-hole components you will need to get started playing with embedded projects. This ...

IT-IM120628018

Overview The Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM ...

IT-IM130312001

This is a pack including 50pcs 100mm dual-female DuPont jumpers. It includes 5 colors jumper wires, 10 pcs for each color. They work great with bre...

IT-IM120530003

Overview This is a power module for the standard bread board. Its concave design will not waste your proto zone. This breadboard power shield supp...

IT-IM120525004

IBridge-lite is a 3X3  key-pad shield with a 5110 Graphic LCD interface. It is compatible with Arduino, you can plug IBridge-lite on Arduino board ...

IT-IM120417023

Overview Dual stepper motor driver shield can drive 2 stepper motors at the same time by Arduino. It can work with the power supply from 4.75V to 3...

IT-IM120417015

OverviewSD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible bo...

IT-IM140726001

Overview Compared to Arduino, it's hard to find the shields and electronic brick customized for Raspberry Pi. This RPI Arduino Shield Add-on has e...

IT-IM140714004

Overview There are seldom OLED add-ons customized for Raspberry Pi in the open source hardware market. In a lot of projects, we only need to displ...

IT-IM140714003

IBridge V1.0 is a 4X4 key-pad shield with a 5110 Graphic LCD interface.You can plug it on Arduino boards directly, and you can get the small develo...

IT-IM120417001