GPS Wireless

SF-BOB-10496

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy bread boarding and simple connection.

SF-GPS-09129

Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

SF-GPS-08297

Horizontal surface mount connector for the EB-85A/FV-M8 GPS receiver.

SF-GPS-10710

Adding GPS to your Arduino has never been easier.

SF-GPS-00464

Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in place at speeds greater than 100mph. 5 meter cable terminated with standard male SMA connector.

SF-BOB-11818

This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers. This is a lower profile breakout and should prove much eas...

SF-GPS-00285

SMA to MMCX Connector. Adapts MMCX jack to a standard SMA bulkhead. This cable interfaces to the GM862 Cellular modules and the PG31 GPS module.

SF-GPS-08288

Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable.

SF-GPS-13670

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don’t have a ...

SF-GPS-09079

Vertical 10 pin SMD connector for the GS406 GPS module.

SF-GPS-09131

That is a GPS chip antenna.

SF-GPS-09980

This is the new UAV Development Board v3 (aka, UDB3). The UDB3 board comes with a dsPIC30F4011 CPU, an MMA7260 three axis accelerometer, and two dual axis IXZ500 gyros (instead of three LISY300AL gyros with v2). The IXZ500 gyros have enough vibration tolerance to be used in RC...

SF-GPS-10919

Venus638FLPx is a high performance, low cost, single chip GPS module targeting mobile consumer and cellular handset applications. It offers very low power consumption, high sensitivity, and best in class signal acquisition and time-to-first-fix performance.

SF-GPS-00579

Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much smaller JST-SH type.

SF-GPS-12751

The EM-506 GPS receiver from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same technology as the ET-301, but includes on-board voltage regulation, LED status indicator, battery backed RAM, and a built-in patch antenna! 6-pin...

DF-TEL0094

You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe.

DF-TEL0042

This is a built-in GPS Antenna for DFRobot LEA-6H GPS shield. This GPS Antenna also have amplifing function. Its SMA male header can adapt to most GPS/GSM modules which have MMCX interface. This antenna is so qualified that it has been used on many navegation intruments and c...

SF-SPX-14248

The Qwiic Accelerometer makes it extremely easy to get playing with tilt, acceleration, and movement sensing. Plug a Qwiic Shield onto your platform of choice, plug the Qwiic Accelerometer onto the shield and start sensing!

SF-SPX-14257

The Qwiic Mux Shield for Arduino - PCA9548A enables communication with multiple I2C devices that have the same address. Some I2C devices have a selectable address, but many have only one. What if you want to control multiple haptic drivers, multiple accelerometers, or multiple...

SF-SPX-14258

The Qwiic NIR Spectral Sensor uses the AS7263 near infrared spectrometer from AMS for spectral identification. What can you do with NIR spectroscopy? It’s an amazing field of study, and the AS7263 brings what used to be prohibitively expensive equipment to the desktop. The AS7...

DF-TEL0097

SIM808 GPS/GPRS/GSM Arduino Shield is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino shield. A credit card size only, according to the standard Arduino pin packaging, compatible with Arduino UNO, arduino Leonardo, arduino Mega and other mainboard. Compa...

SF-GPS-10922

Copernicus II is the latest iteration of the popular Copernicus GPS module from Trimble. The Trimble Copernicus II delivers proven performance and Trimble quality for a new generation of position-enabled products. It features the TrimCore™ navigation software for extremely fas...

DF-DFR0355

INTRODUCTION

SF-GPS-11858

The Copernicus II is a great GPS module from Trimble, but the SMD module prohibits immediate gratification. This DIP allows the customer to gain direct access to the pins on the SMD module. Simply provide 2.7 - 3.3VDC. The Copernicus II DIP breakout has an impedance-matched, e...

SF-SPX-14241

This combo board is the first of its kind to provide a variety of environmental data including barometric pressure, humidity, temperature, TVOCs and equivalent CO2 (eCO2) levels, all over an easy to use I2C bus. The CCS811 is a very popular and very new TVOC and eCO2 sensor. I...

SF-GPS-08975

The LS20031 GPS receiver is a complete GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found in LOC...

SF-GPS-11058

This is the latest version of our Venus GPS board; the smallest, most powerful, and most versatile GPS receiver we carry. It’s based on the Venus638FLPx, the successor to the Venus634LPx. The Venus638FLPx outputs standard NMEA-0183 or SkyTraq Binary sentences at a default rate...

DF-TEL0083-A

This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement.

SF-GPS-00574

This is a 1.75" long JST SH communication cable which can be cut and hacked to your needs and can even be used as pigtails. This little guy can really help your GPS project if you don’t have a lot of space to spare! This cable has two a 6-pin JST connectors with 1mm pitch. Wir...

DF-TEL0101

INTRODUCTION