EL Wire/tape/panel

AF-831

A small, portable inverter for EL wire with an audio input! This inverter has a little microphone and will light the connected EL according to the surrounding audio volume.

SF-COM-11222

Even though the Tron movies have been out for a while, electroluminescence is still the coolest thing since sliced bread. The only downer is carrying around a battery pack and bulky external inverter. Good news, we’ve found a slim battery-powered inverter for your next small E...

AF-2880

These 2-wire cables are 16cm long and come as a set.  One side has a 2-pin JST SM type connector plug on the end.  The other side has a matching 2-pin JST SM type receptacle connector.  They are good for whenever you have 2 wires you want to be able to plug and unplug.  We lik...

AF-564

A small, portable inverter for EL wire. Powers off of 4 AAA batteries (not included!), it can drive 3-4 meters (10 to 13 feet) of our high-brightness EL wire OR 1 meter (3 feet) of EL tape OR a 10cmx10cm piece of EL panel for about 7 hours.

SF-COM-10469

EL inverters allow you to drive EL (electroluminescent) wires. This particular EL inverter accepts a 12 VDC wall adapter. The output is terminated with a JST PH connector, so it plugs directly into the input on the EL Escudo or EL Sequencer board. You can drive EL wires with t...

SF-COM-10793

Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a ribbon.

LB-LR0281-5-B

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in fact flexible and cold to the touch when running. EL wire is...

SF-COM-14702

Do you love EL wire but wish it was more bendable? Well look no further! This EL Wire contains a special bendable wire core that allows you to articulate and mold your EL wire any way that you want!.

SF-COM-12931

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! Each EL wire looks a lot like a thin flexible neon tube and they come in many bright colors which can be driven pretty easily with an inverter. As this i...

AF-406

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You can make it look different colors by changing the coating, for e...

DF-FIT0177

This product includes a pair in-line power wire connectors. If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging' cable assembly that latches strongly. This is the matching connector to the inverter....

SF-COM-12925

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! Each EL wire looks a lot like a thin flexible neon tube and they come in many bright colors which can be driven pretty easily with an inverter. As this i...

SF-COM-12932

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! Each EL wire looks a lot like a thin flexible neon tube and they come in many bright colors which can be driven pretty easily with an inverter. As this i...

AF-1128

Copper tape can be an interesting addition to your toolbox.

AF-416

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The other side has an adhesive on it so you can stick the tape onto som...

SF-COM-10193

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below for other colors) and can be driven pretty easily with an inv...

SF-COM-12781

The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of electroluminescent wire. EL wire is flexible plastic cord that glows brightly when high-voltage AC is applied to it. It’s available in...

SF-RTL-11425

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below for other colors) and can be driven pretty easily with an inv...

DF-DFR0185-LB

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very low current. We have 10 different colors of EL Wire to choose...

SF-COM-10795

Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a ribbon.

SF-COM-10796

Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a ribbon.

SF-COM-10798

Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a panel. Panels ...

SF-COM-10801

Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like the ever-popular EL wire except, well, it’s a panel. Panels ...

AF-415

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The other side has an adhesive on it so you can stick the tape onto som...

SF-COM-11913

These green ELastoLite inverter connectors are to be used in conjunction with the INV133 electroluminescent inverter for driving ELastoLite panels. Each connector is 4.5" long with bare wire leads that can easily be ironed to ELastoLite’s connect patches and bridge the gap bet...

SF-COM-11914

The INV133 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive any EL panel or panels with an area greater than 8in2 (and less than 20in2). The INV133 charges at 3.7V with a 1100mAh current thanks to the mini USB rechargeable L...

SF-COM-10200

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below for other colors) and can be driven pretty easily with an inv...

LB-LR0281-5-O

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows orange when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in fact flexible and cold to the touch when running. EL wire ...

AF-675

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. It looks a little like thin neon. Very bendable, it keeps its shape ...

AF-583

A little bundle to get you started! This project pack contains: