Development Boards

AF-3632

Make a game or robotic controller with this Joy-ful FeatherWing.This FeatherWing has a 2-axis joystick and 5 momentary buttons (4 large and 1 small) so you can turn your feather board into a tiny game controller. This wing communicates with your host microcontroller over I2C s...

AF-3315

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get  240x320 p...

AF-3131

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point.

SF-DEV-09476

The WIZ110SR is a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gauging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ110SR is a protocol converter that transmits the data sent by serial equipment a...

DF-DFR0465

DFRobot's Expansion Shield for Intel Joule is a powerful add-on component to the Intel Joule compute module with its carrier Expansion Board for Intel Joule. Other than what is originally supported by Intel Joule and the expansion board, the expansion shield adds following fea...

SF-PRT-12842

The Beaglebone Black is a great credit-card-sized development platform with a fast growing community, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Beaglebone Black from things like rogue wires that might...

SF-PGM-08312

If you’re looking to play with PICAXE microcontrollers on a computer with only USB, look no further! The PICAXE USB programming cable allows PICAXE micros to be programmed from any platform (Windows and Linux). The cable has the FT232R embedded into the USB connector and will ...

AF-3163

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing.  This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with ...

DF-DFR0082

Plastic wheel with a cutout specially designed to allow attachment to a Parallax continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. Rubberband tires work OK as well, but you'll probably want to get 2 or...

DF-DFR0082

Plastic wheel with a cutout specially designed to allow attachment to a Parallax continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. Rubberband tires work OK as well, but you'll probably want to get 2 or...

AF-1366

As of 11/04/14, Xively has discontinued their support for this Jumpstart kit.  You can still get the mbed boards from us here.

$177.30
AF-3613

Some of us just can't make up our minds: just deciding what to have for dinner is a major decision process. We want it all! And now we can have it all, with this python-powered internet-of-things powerhouse. It's like getting to have pizza AND sushi AND tacos AND casserole AND...

$89.90
SF-DEV-13841

The Tessel 2 is a development board with on-board WiFi capabilities that allows you to build scripts in Node.js. This Tessel provides you with a connected hardware prototyping system that can be used in multiple different applications. Each board boasts thorough command line t...

AF-3133

Give your Feather a sense of place, with an Ultimate GPS FeatherWing. In 2013 we designed the Ultimate GPS module to satisfy all your GPS desires - and now we have brought its power and versatility plus more to our Feather series with the Adafruit Ultimate GPS FeatherWing! Thi...

PL-1226

Note: This combo deal has been replaced by a version that uses Pololu’s second-generation USB AVR programmer and the newer Orangutan SV-328.

AF-3064

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them.

DF-KIT0101

INTRODUCTION

SF-DEV-10170

The BOT120 PICAXE 20x2 Microbot is a simple to assemble kit that uses a unique design which requires no soldering of wires to build and/or reconfigure a versatile robot.

SS-110060905

The micro:bit Shield included in the kit allows you to make the smallest, coolest micro:bit car robot in just a few seconds. This is by adding the versatile magnetic adaptors to your micro:bit and turning it into a Grove Zero control board that can work with the Grove Zero mod...

$55.33
AF-2621

Control Electronics quickly and easily with a tiny USB stick that runs JavaScript - introducing the Espruino Pico! Dig in to the JavaScript of things, with a mini version of the popular Espruino board we already carry

AF-1553

Want to dip your toes into the world of FPGA design - but a little scared of the complexity? You may find a friend in the Mojo.

DF-DFR0203

The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it's as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it's actually pretty smart! Si...

AF-2471

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. W...

$61.45
SF-DEV-14148

The DAQCplate (Data Acquisition and Controller) from Pi-Plates adds a rich set of input/output options to your Raspberry Pi. It includes seven powerful digital outputs for driving external devices such as relays and high-current LEDs, as well as eight analog-to-digital inputs ...

AF-4028

You've heard about CircuitPython and maybe you want to get started fast with a breadboard-friendly microcontroller board! We recommend the ItsyBitsy M4 - a super fast chip with tons of GPIO, analog inputs & outputs, with so much RAM that you'll never have to worry about runnin...

DF-DFR0167-B

Here is a simple 5 pack of blue LED for LilyPad. Light up the night!

SF-PRT-13925

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one ...

DF-DFR0418

You are viewing a 2GB RAM LattePanda Windows 10 mini PC with 32GB eMMC memory. It does include a Windows 10 OEM activation key, which will activate on the initial boot.

AF-3417

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are three! The magic of the Tripler comes when you want to connect your Feather to two other Feather Wings without needing any stacking...

SF-DEV-14010

This is a simple pack of five Pink LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.