Development Boards

LB-00182

The British Invasion is here! No, not music.

LB-00300

The Little Bird Uno R3, is a 100% Arduino™ compatible development board!

$22.93
LB-00181

The British Invasion is here! No, not music...microcontrollers! New to Australia is the newest and easiest way to learn programming and electronics - the BBC micro:bit.

$47.64
AF-3530

The British Invasion is here! No, not music...microcontrollers! New to the USA is the newest and easiest way to learn programming and electronics - the BBC micro:bit.

KI-5605

This micro:bit case keeps your BBC micro:bit in perfect condition but also offers a number of other benefits.

AF-50

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects.

LB-LR0347A

This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it’s not easy to accidentally turn...

DF-DFR0282

Beetle is a extremely the smallest Arduino leonardo board. It derives its core notion from minimalism without compromising functionality.

SF-DEV-13883

Sure, your flashing, chip-tune playing T-shirt is really cool at the party… but at some point you need to turn it off. And yes, you could just pull the battery, or maybe you’ve even sewn a LilyPad slide switch in-line. Wouldn’t it be nice if there was just a switch on the batt...

AF-3362

The British Invasion is here! No, not music...microcontrollers! New to the USA is the newest and easiest way to learn programming and electronics - the BBC micro:bit.

SF-DEV-14028

This 8mp camera module is capable of 1080p video and still images that connect directly to your Raspberry Pi. This is the plug-and-play-compatible latest version of the Raspbian operating system, making it perfect for time-lapse photography, recording video, motion detection a...

$43.01
SF-DEV-14055

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.5 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: no external programmer needed! You can program for the Teensy i...

DF-DFR0039

We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).

$36.87
SF-DEV-13736

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy i...

AF-3085

The Prop Shield with Motion Sensors for Teensy 3.2 and Teensy-LC is meant for making interactive light and sound effects on small handheld props and wearable costumes! Good for all sorts of projects, and designed by the creator of the Teensy so you know it's gonna be well supp...

$53.25
SF-DEV-14057

AF-1500

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use ...

$23.55
SF-DEV-13305

The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without break...

SF-COM-09061

Atmel’s ATMega328P 8-Bit Processor in 28 pin DIP package. It’s like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to...

DF-DFR0021-W

This white LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

AF-3000

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required!

AF-659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Ad...

DF-DFR0151

The DS1307 Real Time Clock module developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimu...

SF-DEV-11008

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.

SF-DEV-13902

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.

AF-1008

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, colour coded. You get 12 pieces in 6 colours. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter...

SF-DEV-14013

This is a simple pack of five Red LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.

AF-1222

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!

DF-FIT0533

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection.

DF-DFR0330

This is a wonderful combo, 2.4GHz Mini Wireless QWERTY keyboard mouse, TouchPad combo, with USB interface adapter for Raspberry Pi, Cubieboard, Mini PC and others. The Ergonomically handheld design is easy to carry and operate. Build-in removable rechargable Li-ion battery tha...