Beaglebone

SF-COM-13945

This is an class 10 16GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi. This SD card and adapter is perfect for a Raspberry Pi first timer or beginner while still providing convenience for anyone with more experience with the platfo...

AF-276

This is a FCC/CE certified and UL listed power supply.

AF-2076

These simple 2x23 male headers are a great addition to your Beagle Bone Black, plugging right into each set of side-sockets.  Each pack comes with two headers so you can connect prototype PCBs or capes on.

AF-1876

Note: As of May 12, 2014 Adafruit is shipping Rev C. We have discontinued selling Rev B. There are no exchanges or "upgrades" for Rev B to Rev C.

$87.71
SF-DEV-12773

The CryptoCape is the BeagleBone’s first dedicated security daughterboard and was made in collaboration with our Hacker In Residence, Josh Datko. Known as “shields” on other platforms, a BeagleBone cape attaches to the expansion headers of the BeagleBone. This cape adds specia...

AF-1996

This is the Element 14 version of the BeagleBone Black Rev C. It's the exact same as our other BBB but if you have a preference of manufacturer, here's your chance to support our friends Element 14.

SF-PRT-12842

The Beaglebone Black is a great credit-card-sized development platform with a fast growing community, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Beaglebone Black from things like rogue wires that might...

AF-3239

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one cable,...

AF-3238

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one cable,...

AF-260

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector, among other things.

SF-DEV-14162

The BeagleBone Black Wireless is a low-cost, credit-card-sized development platform with good support from a fast-growing community. Replacing the 10/100 Ethernet port with onboard 802.11 b/g/n 2.4GHz WiFi and Bluetooth, the BeagleBone Black computer now comes with built-in wi...

SF-DEV-12857

The Beaglebone Black is a low-cost credit-card-sized development platform with good support from a fast growing community. The Beaglebone Black differs slightly from the regular version by providing you with an onboard micro HDMI port, 512MB of DDR3L DRAM, 4GB onboard flash me...

AF-572

Add some circuitry to your Beagle Bone or Beagle Bone Black with our lovely Proto Cape. If you have a 'Bone you need one of these! This PCB fits neatly on top of a Beagle Bone, without getting in the way of the Ethernet jack, and provides a breakout to both 46 pin headers - wi...

AF-513

From the fine people who have brought us the Beagle Board, a smaller, lighter, but powerful single board linux computer, Beagle Bone! We like this move to a more compact and integrated SBC. For example, there is onboard Ethernet and USB host, as well as a USB client interface ...

SF-COM-11609

This is an 8 gig microSD memory card. It’s perfect for massive datalogging without taking up a lot of space. These microSD cards have a simple to use SPI interface allowing any micro to read and write data. It even comes with an SD card adapter and a USB adapter!

AF-703

If you've heard about the Beagle Bone Black and you want to hit the ground running, this starter pack is for you.

SF-COM-13004

This is an awesome little microSD USB reader. Just slide your microSD card into the inside of the USB connector, then stick this into a USB port and the card’s contents will pop up on your computer. Very sneaky - we love it! This little guy is great for pulling data logs off m...

SF-COM-13833

This is a class 10 16GB microSD memory card, perfect for housing operating systems for single board computers and a multitude of other information. Since this is a class 10 microSD it is capable of transferring data at speeds up to 45MB/s allowing it to have a noticeable incre...

AF-2693

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Works great with any device in the Adafruit shop that...

AF-702

Ready to prototype your next Beagle Bone project? You'll certainly want this handy Proto-Plate! Not only is it really good looking, its also very useful, holding your Beagle Bone or Beagle Bone Black steady alongside a standard half-sized breadboard.

AF-699

Pack up your Beagle Bone or Beagle Bone Black in this lovely clear plastic case.

AF-1278

Adafruit is no longer shipping the BeagleBone Black Rev B, it has been replaced with the Rev C as of 5/12/14 - the Rev C now has 4G flash and also comes with Debian, it also costs slightly more.

AF-435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of ...

AF-102

Add mega-storage in a jiffy using this 4 GB micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Tested and works great with our Wave shield, Data logger shield and GP...

AF-1012

Make your Internet of Things device cable-free by adding WiFi.

AF-1810

While the UniBBB isn't made of Valyrian Steel or Adamantium or whatever your favorite fictional metal is, it's still the best and sleekest way to protect your precious Beagle Bone Black.

AF-2627

Now that you have your BeagleBone Black it's a good idea to protect it. And while our inexpensive practical acrylic case is great for showing off your BBB, you might want an enclosure that's a bit more luxurious.  Luckily, there's the BBB Case - Black with Smoke Top - by Anidees.

AF-706

Stack to the max with our Beagle Bone Proto Cape using these ingenious stacking headers. They're just like 2x23 0.1" spaced female headers but with a twist! The 'legs' are extra-long so you can solder it -through- a PCB and plug it into the Bone. You can stack as many as you'd...

AF-3396

Add a 4.3” TFT LCD Display with capacitive touch to your BeagleBone! The Element 14 LCD Display Cape offers a high luminance, cap-touch panel display function.

AF-1555

We are thrilled to release Adafruit's lovely Beagle Bone Black case, designed by Mike Doell (who made our really terrific Raspberry Pi enclosures as well).