Batteries

AF-1769

A simple 2-pin connector that is compatible with the "JST PH 2-pin" connector - perfect for soldering to the bottom of our 3.3V Logic Trinket and 5V Logic Trinket! These mate perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA ...

TB-SB2486

SLA

TB-SB2331

Buy in bulk and save. Contains 24 mercury & cadmium free AAA alkaline batteries

AF-2379

ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well.  Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi 2.  Just hook up the standard USB end to a ...

AF-354

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and over-current protection.

AF-1781

Need a big battery for your project? This lithium ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage and over-current protection. Yet, it is slim and easy to fit into many project cases.

SF-PRT-14367

We've taken the classic, portable, rechargeable lithium ion battery pack and tweaked the design to make it amenable to low current applications. While similar power banks are typically designed to power off automatically at lower currents, this battery pack will continue to op...

AF-3898

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a ...

TB-SB2413

AAA Alkaline Eclipse Battery - Pk 4

AF-380

These are the highest quality & capacity batteries, the same as shipped with the iCufflinks, iNecklace, Datalogging and GPS Shields, GPS HAT, etc. One battery per order (you'll want one battery per cufflink or pendant.)

TB-SB2427

General purpose remote control battery.

AF-727

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That...

DF-FIT0111

Classic 9V connector terminated with 2-pin polarized Molex connector. 15cm in length.

AF-261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly charger!

TB-PH9230

9V Battery clipThe holders are moulded in Delryn with corrosive resistant nickel plated springs and studs.- All have connection wires 150mm long- We can supply OEM quantities of holders with special configurations.