Arudino Compatibles

LB-EagLED

EagLED is Littlebird Electronics' wearable development kit. It's a complete Arduino compatible microcontroller that has LEDs, Light Sensor, Push Button and Battery Board built into a snappable board.

LB-LR0347A

This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it’s not easy to accidentally turn...

SF-KIT-13094

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer.

SF-PRT-09280

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields.

SF-PRT-10007

These headers are made to work with the Arduino Main Board, Arduino Pro, and the Arduino Mega. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin and 2 6-pin), enough to connect a shield to...

SF-PRT-09279

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields.

AF-1500

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use ...

SF-PRT-11376

This is a 10-pin female header, with extra long legs – great for stacking R3-compatible Arduino shields!

AF-659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Ad...

AF-1222

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!

AF-1501

As of October 9th, 2015 the 5V Trinket comes with a micro-USB connector instead of a mini-USB connector!

AF-2010

Trinket's got a big sister in town - the Pro Trinket 3V! Pro Trinket combines everything you love about Trinket with the familiarity of the core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in.

DF-DFR0367

New fast and little computer is online. Wintel Box is a new generation mini PC that's ready-to-go out-of-the-box and offers the performance, quality, and value you expect from Intel PC.

SF-DEV-13040

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Po...

SF-DEV-13042

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer.

AF-2590

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a Pro Trinket 3V ...

DF-DFR0331

Romeo for Intel Edison controller is a multi-purpose, all-in-one development platform based on Intel Edison and Arduino SoC. It is especially designed to be useful for robotics applications. Romeo for Intel Edison is compatible with Arduino open source platform and Linux, and ...

SF-DEV-13770

The Intel® Edison is an ultra-small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Po...

AF-2725

The Particle Shield Shield converts the footprint and pins of your Photon into that of an Arduino, allowing for use of existing Arduino shields and accessories.

SF-DEV-13041

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Po...

SF-DEV-13043

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer.

SF-DEV-13044

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer.

AF-70

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket...

AF-3034

The Cloud from Seeeduino is a microcontroller based around the Dragino WiFi IoT module HE and the classic ATmega32u4.  This board is Arduino compatible with built-in ethernet and WiFi support.  There's also a USB-A port that makes it good for designing prototypes that need net...

AF-3033

The Arduino 101 is simple. It's a board that combines the universal appeal of Arduino with the latest technologies - like the Intel Curie module, Bluetooth LE capabilities, and a 6-axis accelerometer/gyro.

AF-1509

We're no longer selling this pack of Trinket 3V+5V, we recommend our Trinket M0 which has better USB support, way faster processor, a ton more memory and CircuitPython support!

DF-DFR0338

INTRODUCTION

AF-795

Introducing the MENTA, a portable minty Arduino-compatible project that fits into a common mint tin.

AF-72

If you've ever struggled to use a solderless breadboard with an Arduino, you understand how frustrating it can be!

AF-2661

Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit...