Arduino

LB-00300

The Little Bird Uno R3, is a 100% Arduino™ compatible development board!

SF-DEV-11021

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for L...

SF-DEV-11224

This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for L...

DF-DFR0572

NB-IoT (Narrow Band-Internet of Things) technology is a new IoT technical branch and supports cellular data network connection of low power consumption device in WAN (Wide Area Network), which also called as LPWAN.

TB-MP3146

This slim power supply is ideal for powering you Arduino project. Providing 9v and 500mA these are an Australian RCM power supply.

AF-50

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects.

DF-KIT0003

EcoDuino is evolving. Now the EcoDuino has an enclosure. It is protected from water splashes, so it is safe to use beside your plants. The Ecoduino now sports an Atmega32U4 which eliminiates the requirement of an adapter. And sketches can simply uploaded via Mirco USB just ...

LB-LR0347A

This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it’s not easy to accidentally turn...

DF-DFR0100

Welcome to the electronic interaction world! DFRobot proudly presents the Arduino Beginner/Starter Kit for those who are interested in learning about Arduino and electronics. Starting from basic LED control to more advanced environmental sensing, monitoring and actuators. This...

LB-LR0186

This is a simple breadboard power supply module that is capable of 7-12V input voltage and selectable outputs (5V or 3.3V) regulated voltage.

LB-LR0093

Description:The ProtoShield is prototype expansion board with 2 LEDs and 2 button, which can be used directly and more convenience. All the pins and power have been lead out. It is very suitable for building prototype circuit with Arduino.Feature:ProtoShield for Arduino Duemil...

LB-LR0046

High quality relay. On board SMD optocoupler isolation. The module can be set high or low by a jumper setting trigger. With a fault-tolerant design, even if the control line is broken, the relay will not operate. Terminal lead connection.

LB-LR0005

This Arduino compatible module measures the reflectivity of a surface with an infrared emitter/detector pair.

LB-LR0185

Logic Level Converter Bi-Directional IIC 4 Way Level Conversion Module

LB-LR0004

DF-KIT0113

DFRobot's Gravity Genuino (Arduino) 101 Starter Kit is an absolute beginner kit to get started with Arduino/Genuino 101. It comes with 11 projects with easy to follow tutorials. The Gravity interface (Plug&Play) provides the kit a fantastic user experience while keeping the gr...

SF-KIT-14418

The SparkFun Inventor’s Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits ...

DF-DFR0282

Beetle is a extremely the smallest Arduino leonardo board. It derives its core notion from minimalism without compromising functionality.

LB-RULE

Get ready, get excited, this is the product you have been waiting for all your life!

SF-DEV-09947

This new version corrects the pin out for the GPX and RESET pins. The SparkFun USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. This means you could use your Arduino to ...

DF-KIT0027

This Arduino official starter kit walks you through the basics in a hands-on way, with creative projects you build by learning, thanks to a selection of the most common and useful electronic components with a selection of 15 projects that start from a low complexity, in order ...

LB-CTCREP

Already run the Crack the Code Unit of Work and want to replenish your component box and student sets?At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work.

SF-PRT-09280

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields.

SF-PRT-10007

These headers are made to work with the Arduino Main Board, Arduino Pro, and the Arduino Mega. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin and 2 6-pin), enough to connect a shield to...

AF-64

This is a cute half size breadboard, good for small projects.

DF-FIT0110

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the sim...

SF-PRT-09279

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields.

DF-FIT0151

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm(0.22x0.08"), center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might ...

SF-PRT-11417

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to c...

AF-1500

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use ...