3D Printing Accessories

DF-FIT0436

Are you still looking for the 3D printer cartridge heater? This is a 60W high performance heater. It is widely used in mould processing, manufacturing and someplace which need high temperature.

DF-FIT0276

This box of grease is very small, light and easy to carry. It can be uesd in many places. It is suitable for the condition of light load or high speed plastic gear, plastic parts, nylon retainer bearing lubrication, protection and noise reduction. You will need it for your rob...

DF-FIT0243

This is 1 meter of PFA tubing with a 6mm diameter. PFA has a high temperature resistance with a melting point of 305C. This tubing is used as a bowden tube in some 3D printer setups.

DF-FIT0435

INTRODUCTION

AF-2391

Slice, store, and print your 3D files from any web enabled device with the AstroBox pack! 

DF-FIT0432

Overlord nozzle platform, aluminium alloy material, could be installed on Overlord 3D printer. Compatible with both OverLord and OverLord Pro.

AF-649

You can 3D print! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the many ways to show and share.

DF-FIT0434

INTRODUCTION

AF-2389

AstroPrint is free, open source software for wirelessly managing 3D printers. It features a mobile friendly user interface that works across multiple devices and screen resolutions. 

DF-FIT0213

This is a very sensitive and stable lever switch which is commomly used in industrial automation projects.

DF-3DP0025

This is an E3D nozzle for OverLord and OverLord Pro (models produced before October 2016).

AF-2896

This OctoPrint parts pack is everything you need to start using OctoPrint software with your 3D printer! OctoPrint lets you connect to your printer through a device like a Raspberry Pi and control your print job with basic functions like starting, stopping, and pausing.  It wi...

AF-2416

OK yes, it's just masking tape. A big honkin' roll of I'm blue da-ba-dee-da-ba-die masking tape.

AF-490

You can 3D print! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share.

DF-FIT0307

This is a high quality PTFE-PFA adapter for isolating the heat generated from the heater block of a 3D printer's extruder.

DF-FIT0282

This is a Heater used to heating the hot end which is very popular for 3D printers such as Reprap, Ultimaker and Makerbot. It has a right angle which make it easy to be installed at the hot end. 1.6m wire is long enough to suit most situation. The bright red color gives a bri...

DF-FIT0438

INTRODUCTION

AF-3098

Looking to improve the printing bed on your Ultimaker? Check out the PRINTinZ Skin for Ultimaker!

DF-FIT0431

INTRODUCTION

DF-FIT0437

INTRODUCTION

AF-1630

LEO the Maker Prince teaches children (both young and old) about 3D printing by following Carla and LEO's journey through Brooklyn. LEO is a walking, talking robot who has the magical ability to to print (in plastic) any object that Carla draws. The other robots have their own...

DF-FIT0254

This is a high quality PEEK insulator and PTFE-PFA adapter for isolating the heat generated from the heater block of a 3D printer's extruder.

AF-3080

This Precision Fixturing and Toe Clamp Set turns your Othermill into a production tool! It ensures rigid and consistent work-holding without the use of tape or glue. You can easily fixture and remove materials with a simple turn of the hex key.

DF-FIT0234

This is an 20 tooth timing pulley with a center diameter of 8mm (0.31"). These pullies are great for many mechanical projects. They are also very commonly used in 3D printers.

DF-FIT0247

This is an 20 tooth timing pulley with a center diameter of 5mm (0.2"), this is a good fit for mounting on common stepper motors. These pullies are great for many mechanical projects. They are also commonly used in 3D printers.

DF-FIT0240

This is a 50mm (1.97") cooling fan. It is powered by simple 2 wires (+-) . It features a double ball bearing which makes it running quietly and durable. It can not only be applied in 3D printer excuder but also standard PC chassis cooling fan for RAM.

DF-FIT0241

This is a 2 wire (+-) blower fan for all your cooling needs.

AF-2132

Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate.  Over time, chiseling objects off can scratch and damage your plate - and get pretty annoying - so wouldn't it be great if you could ju...

AF-2233

Removing 3D printed parts from your 3D printer can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate.  Over time, chiseling objects off can scratch and damage your plate - and get pretty annoying - so wouldn't it be ...

DF-FIT0440

Kingston Technology Secure Digital High-Capacity (SDHC) memory cards are fully compliant with the new Secure Digital Association 2.00 specification. They are a new performance class of SD memory cards designed to meet the storage demands of high-quality digital still and video...