ATmega328 chip with Arduino UNO Bootloader

ATmega328 chip with Arduino UNO Bootloader Australia
ATmega328 chip with Arduino UNO Bootloader Australia ATmega328 chip with Arduino UNO Bootloader Australia ATmega328 chip with Arduino UNO Bootloader Australia
Product ID: DF-DFR0113

$15.84

This item is currently unavailable.

Description
Updated about 1 month ago
Data Sheets & Documents
Updated about 1 year ago
Collections
Updated about 1 month ago
DFRobot's Description of the ATmega328 chip with Arduino UNO Bootloader

Description

This ATmega328 chip is Discontinued Now, We recommend another ATmega328 Chip with Arduino Bootloader as a suitable replacement.

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino UNO (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Duemilanove board that has all of these built into the board.

Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage!


DOCUMENTS


SHIPPING LIST

  • ATmega328 chip with Arduino UNO Bootloader x1
ATmega328 chip with Arduino UNO Bootloader is listed in: