ATmega328 Chip with Arduino Bootloader

ATmega328 Chip with Arduino Bootloader Australia
ATmega328 Chip with Arduino Bootloader Australia ATmega328 Chip with Arduino Bootloader Australia ATmega328 Chip with Arduino Bootloader Australia
Product ID: DF-DFR0081

$8.65

We can get 10 units from DFRobot Australia.
If you order today we can dispatch this stock between Friday, May 03 and Wednesday, May 08 2019.

Description
Updated 14 days ago
Data Sheets & Documents
Updated about 1 year ago
Collections
Updated 14 days ago
DFRobot's Description of the ATmega328 Chip with Arduino Bootloader

Description

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Duemilanove board that has all of these built into the board.

Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage!


DOCUMENTS
 
SHIPPING LIST
 
  • ATmega328 chip with Arduino Bootloader x1
ATmega328 Chip with Arduino Bootloader is listed in: