Aluminium Alloy Case With Cooling Heatsink for Raspberry Pi 4

Learn to assemble the Aluminium Alloy Case for Raspberry Pi 4 in eight steps!

Featured

Written By: Cherie Tan
)">

Difficulty

Easy

Steps

8

Time Required

Introduction

The Little Bird Aluminium Alloy Case with Cooling Heatsink was made for the Raspberry Pi 4.

In this guide, learn to assemble this sturdy case in just eight steps!

Complete this guide to tackle overheating issues on the Raspberry Pi 4.

Tools

Add Tools to Cart

    • The Little Bird Aluminium Alloy Case with Cooling Heatsink Case is made of aluminium alloy created through CNC machining manufacturing technology. It acts as a giant heatsink which will greatly reduce the temperature of your Raspberry Pi 4! 

      In this guide, we will show you how to assemble it in eight simple steps.

    • Gently peel off the transparent backing from the three pieces of thermal tapes. 

    • Then, carefully stick the three pieces of thermal tapes onto the three chips as shown. 

    • The positioning of the thermal tapes does matter as these will be stuck onto the jutting areas found on the case when it is later attached on to the Raspberry Pi. The side of the thermal tapes that have wording should now be face up.

    • Next, very gently peel off the backing with wording from the thermal tapes now attached to the Raspberry Pi.

    • Place the bottom part of the case against the Raspberry Pi.

    • Turn the Raspberry Pi over and then place the top part of the case against the Raspberry Pi.

    • Now very carefully turn it to the back and insert the four screws into the holes.

    • Then turn the allen key clockwise to tighten the screws in place. The Aluminium Alloy Case will now be secured against the Raspberry Pi.

    • The case allows easy insertion of a microSD card. Go ahead and insert the microSD card into the Raspberry Pi as shown.Â