Introduction

Did you know that your ShakeUp has an in-built temperature sensor? 

In this guide, we'll show you how to get started with data logging using the Arduino IDE and Google Sheets. 

Complete this guide to start logging temperature data with your ShakeUp!
    • You will need the Arduino IDE downloaded and installed on your computer. Already got the Arduino IDE installed and set up for the ShakeUp? Move on to the next step! If not, please follow our guide on how to set up the Arduino IDE for ShakeUp.

    • Open up the example sketch for the temperature sensor by clicking on:File > Examples > Shakey > Demo > TemperatureSensor

    • Click on Tools > Serial Monitor

    • If it's successfully working, you should see the temperature being printed (in degrees Celsius and degrees Fahrenheit) to the serial monitor.

    • In the previous sketch, the temperature was printed every 1 second. To start data logging, we need to go beyond printing it to the serial monitor. Go ahead and open up the next sketch by clicking on: File > Examples > Shakey > Demo > TemperatureSpreadsheet

    • Upload this sketch to the ShakeUp by clicking on the 'Upload' button on the top left-hand corner in Arduino IDE.

    • Now head to Google Sheets and click on 'Blank' to create a new Google Sheet.

    • Connect an alligator clip from 'Earth' to 'Space' on the ShakeUp.

    • Once you've got the spreadsheet open and the code uploaded to the ShakeUp, you'll notice that the temperature will be logged automatically into the Google sheet. Nice work!