13.56MHz RFID/NFC Bracelet [1KB]

13.56MHz RFID/NFC Bracelet [1KB] Australia
13.56MHz RFID/NFC Bracelet [1KB] Australia 13.56MHz RFID/NFC Bracelet [1KB] Australia 13.56MHz RFID/NFC Bracelet [1KB] Australia
Product ID: AF-921


We have 5 units of the 13.56MHz RFID/NFC Bracelet [1KB] in stock at our Sydney warehouse.

If ordered before 2pm, this part would be delivered on or before Wednesday, Apr 24 to most parts of Australia.

We can get a further 63 units from Adafruit Australia.
If you order today we can dispatch this stock between Thursday, Apr 25 and Tuesday, Apr 30 2019.

Updated 14 days ago
Data Sheets & Documents
Updated about 1 year ago
Updated 14 days ago
Adafruit's Description of the 13.56MHz RFID/NFC Bracelet [1KB]


This is a blank 13.56MHz RFID/NFC silicone bracelet. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle ISO/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID Shield for Arduino!

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

These use a ISO/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone/tablet.

13.56MHz RFID/NFC Bracelet [1KB] is listed in: